53" Commercial Centered Flail Mower, FH-FMC135 | Betstco Sales, Parts, and Service: (2024)

Sale!

Save 10%

$3,050.00

In stock

SKU: FH-FMC135-FCategory: 3-PT COMMERICAL/ROUGH DUTY FLAIL MOWERSTags: fall-com, fh-fmc, mowersavings, summercommerical

Lift Gate Needed *

Extended Warranty

Forged Hammers *

Forged Blade Swap

Additional Belts

Cast Steel Hammers

Grass Blades

  • Description
  • Additional information
  • Explaining the flail mower
  • Usage Video
  • The Manual

Description

This commercial flail is ideal for mowing the growth between the rows and/or mulching your pruning in place. The mowing width on the FMC is centered behind your tractor for easy control of where you mow. The FMC has a strong box channel 3-point frame and a deck with additional reinforcement. Under the deck. You have clump buster bars that assist the mulching action of this flail. Comes with our 27 ounce EFGC all crop hammer style blades installed. These blades chop grass, weeds and brush in one pass.

Key Features:

  • Centered Commercial flail has 65 HP cast-iron gearbox
  • Multiple drive belts assure power to the blades.
  • Adjustable rear roller with mud scraper bar, heights of 0 to 6 inches
  • “Y” grass/rock blades are optional.
  • Under deck clump busters
  • Zero cutting width offset keeps your flail where you want it.
  • Rear height adjusting roller with tapered ends to eliminate gouging when turning
  • Optional hydraulic offset kit available.

Specifications:

SpecFH-FMC135
Working Width53”
Overall Width59”
Min. HP Req.26 HP
HitchCat I
Gear Box Rating65 HP
Cutting OffsetZero – Centered Cut
Std Hammer Blades20 Hammer Blades
Optl “Y”/Rock Blades40 “Y”/Rock Blades
Housing Thickness4mm
Side Plate Thickness5/16”
Rotor Dia.4”
Rotor Shaft Dia.4 1/2”
Blade Swing15”
No. of Belts2 Belts
3pt Conn. Width27 1/2
Driveline TypeSeries 4 quick connect Shear bolt, 6-spline
Weight616 lbs
Crated Weight656 lbs

Details:

Overall Width: The FMC 135 has a overall width of 59″.

Cutting Width: The FMC 135 has a tilling width of 53″.

Weight: The FMC 135 has a weight 616 lbs.

HP Requirements at PTO: The FMC 135 requires 26 – 65 PTO horsepower.

Cutting Height: The FMC series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The FMC series has a housing of 4mm.

Side Plate Thickness: The FMC series has a side plate thickness of 5/16″.

Blade Type: The FMC series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). The Y-blades weigh 10.9 oz. Use the hammer blades for clearing saplings (3″ diameter or less), and the Y-blades for grasses.

Number of Blades: The FMC 135 uses 20 hammer blades or 40 Y-blades.

Precision Blade Overlap: On the FMC series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Rotor Swing Diameter: 15″ Large swing so that the blades build required inertia.

Hitch Type: Category 1, standard 3-point.

No Offset, Perfectly Centered: The FMC series is perfectly centered so you can pick the size to match your tractor’s wheel width.

Drive Belts: The FMC 135 uses 2 belts.

Gearbox Rating: The FMC series is rated 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Support Before and After the Sale:At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

27 Oz. Hammer Blades

20 Blades

Optional "Y" Rock Blades

40 Blades

Housing Thickness

Reinforced 6 gauge

Side Plate Thickness

5/16"

Roller Dia.

4"

Rotor Shaft Dia

4 1/2"

Blade Swing

15"

No of Belts

2 Belts

3-Pt. Conn. Width

27 1/2

Driveline Type

Series 4 Quick Connect, Shear Bolt, 6-Spline

Weight

616 lbs

Crated Weight

656 lbs

Explaining the flail mower

Usage Video

The Manual

The Manual

Related products

  • Sale!48″ Heavy Duty Flail Mower, FH-EFGC125Save 10%$2,800.00 $2,520.00In stockAdd to cart
  • Sale!60″ Standard Duty Flail Mower, FH-EF155Save 10%$2,327.00 $2,094.00In stockAdd to cart
  • Sale!68″ Standard Duty Flail Mower, FH-EF175Save 10%$2,450.00 $2,205.00In stockAdd to cart
  • Sale!68″ Commercial Centered Flail Mower, FH-FMC175Save 10%$3,500.00 $3,150.00Only 3 left in stockAdd to cart
53" Commercial Centered Flail Mower, FH-FMC135 | Betstco Sales, Parts, and Service: (2024)

FAQs

What are the disadvantages of a flail mower? ›

Flail mowers tend to chop and bruise the grass more than other types, potentially affecting the quality of the hay. This bruising can lead to faster moisture loss, which might seem beneficial for drying but can actually reduce the nutritional value of the hay.

How much horsepower does it take to run a flail mower? ›

Most flail mowers require a minimum of 20 to 25 horsepower to operate effectively. Ensure that your compact tractor meets the minimum horsepower requirement of the flail mower you plan to use.

Are flail mowers worth it? ›

Flail mowers offer a superior cutting quality compared to brush hogs. Because they have several knives spinning at high speeds, they can cut through thick vegetation with ease and leave a clean, even finish.

How much horsepower does a 3 point flail mower need? ›

We generally find 3 belts are good on tractors up to about 55-60hp , above that 4 or more belts is more durable. If you are only mowing low grass or not very dense growth it will be less stress on the belt drive.

What blades are best with a flail mower? ›

When cutting grass and brambles,a flail mower head fitted with knives,or Y shape blades is the best choice.

How high can you cut grass with a flail mower? ›

Flail Mower Capabilities

Can cut small trees and saplings, handle rocks, and mow in both directions. Some models can even handle grass and vegetation up to 30 inches tall.

What RPM should a flail mower be? ›

The engine RPM should be set high, with the PTO at 540 RPM. This speed ensures that the flails have enough velocity to lift and effectively chop the material. Operating at too low a speed can cause the mower to bog down, resulting in inefficient mowing.

Is Bush Hog or flail mower better? ›

In conclusion, brush hogs tend to be a better choice for large overgrown grassy fields and can handle such conditions with greater speed, though lower quality, than flail mowers.

What PTO is needed for a flail mower? ›

The FL flail mower range is suitable for tractors from 23 to 40 PTO horsepower with a category 1 hitch. The FL mower is compact and light, making it a perfect choice for sub-compact or compact tractors. It's recommended for weekend farmers and gardening.

How big of a tree will a flail mower cut? ›

Flail mowers are best suited for trees with a diameter of up to 2 inches or slightly more. Attempting to cut larger trees may cause damage to the mower and result in inefficient cutting. Secondly, the type of trees and their density in the area plays a significant role.

Can you use a flail mower on wet grass? ›

While it is generally not a good idea to attempt to mow wet grass, a pedestrian flail mower can certainly handle wet grass conditions. Because pedestrian flail mowers do not use blades you do not need to worry about clogging up the blades as you would if you were attempting to mow wet grass with a conventional mower.

Can a flail mower handle rocks? ›

In conclusion, when a flail mower hits a rock, its design specifically helps to mitigate damage and maintain safety. The pivoting action of the flails reduces the impact force, the robustness of hammer blades handles such encounters better, and the overall mower design helps minimize debris projection.

What can you mow with a flail mower? ›

Can I mow my lawn with a Flail Mower? Like a paddock-topper, it will cut long grass and woody matter, but it's also suitable for short grass such as lawns, leaving a high-quality finish if employed consistently.

Which way should a flail mower spin? ›

As the blades of the flail mower are spinning vertically to the ground, the grass or material to be cut is lifted and cut/chopped many times before it is ejected from the rear of the flail mower.

Is a flail mower better than a bush hog? ›

Which Attachment Is Right For You? Most of our customers opt for the lower cost brush hog when choosing a mowing attachment to tackle basic mowing of fields and brush. If you're hoping for a cleaner cut or safety is a top priority, a flail mower is your best bet.

Which is better, a flail mower or finish mower? ›

If you're wanting a polished, nicely cut lawn – the finish mower would be the best fit. If you're mowing along fences, cutting through dense material, or want to mow ditches and other hard to reach areas – the flail mower or offset flail mower would be a great fit.

How big of brush can a flail mower cut? ›

Alternatively, flail brush cutters tend to have larger cut widths than rotary brush cutters, with cutting shafts ranging from 38 to 102 inches in width. Some triple-gang flail mowers come with attachments that increase that width to over 200 inches.

References

Top Articles
Latest Posts
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 6518

Rating: 4.6 / 5 (76 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.